QC Inspector

Batam, May 16, 2008
To :
PT. BATAMEC SHIPYARD
TANJUNG UNCANG - BATAM

Dear Sir/Madam,

I was heard that your company have vacant position as QC INSPECTOR, and I am very interested to fill in that position. I enclose my resume as a first step in exploring the possibilities of employment with your company.

My name is Chairul, A.Md. I am 27 years old single male, graduated from Padang Institute of Technology, majoring in Mechanical Engineering with GPA 2.74 Scale 4.
I am responsible and active I can work independently but also good in team work. I’d like to learn new things.
I am interested working in your company because I ant to apply the science which I get and enlarge my experience. I have abilities and skills in this field based on my education.
I enclose my curriculum vitae. I would very glad to have an interview with you to get more information about my capability.
Finally, I’d like to thank you for your attention and will looking forward for your reply.

Sincerely yours,

Chairul, A.Md

CURRICULUM VITAE

 PERSONAL DATA

Name : Chairul, A.Md
Place/Date of Birth : Batam,18th February 1981
Religion : Moslem
Gender : Male
Marital Status : Single
Nationality : Indonesia
Address : Blok II
Jl. Rambutan No. 7
Lubuk Baja – Batam
Phone Number : 0813 700 25468 or 0778 – 7054868
e-mail : rl_doank@yahoo.com

 EDUCATION BACKGROUND

High School : SMK Kartini Batam
University : Padang Institute of Technology
Major : Mechanical Engineering
Degree : Diploma

 TRAINING and COURSE

 LPT ASNT TC-1A Level II Course held By NDE Consultancy Services Sdn. Bhd & Indonesian Welding Society (IWS) From March 16 to June 10, 2007 With Certificate No : 21/LPT-2/XV/IWS-NDE/2007.

 MPT ASNT TC-1A Level II Course held By NDE Consultancy Services Sdn. Bhd & Indonesians Welding Society (IWS) From March 16 to June 10, 2007 With Certificate No : 39/MPT-2/XV/IWS-NDE/2007.

 PROFESIONAL EXPERIENCE

PT. Tanjung Harapan Sentranusa (Nidec – Sankyo)
May 2005 to June 2007
Position : Production Asst. Supervisor (Molding Section)
Job & Responsibility:
 Manage & Control Production to Achieve Daily Target
 Follow Up The Key Process/Station on Quality Issue to Rectify The Current Status, Whether The Process is Still Within Assurance Status.
 Follow Up Quality Problem to Reassure the Process Condition as Intended as According to the Listed “Line Observation List”
 Manpower Control Development & Training
 Prepared Material Plan for Running Production
 Calculate & Control Weekly In Process (WIP) to Meet Accurate demands

Dear,

I heard your company have vacant for job QC Inspector.
I am interested for Apply that possition.
I have Certify Coating Inspector Level I By INDOCOOR, and have Experience for the same possition before.

Thank you for your Attention and waiting forward from you soon.
Best Regard
YUDHI FITRI

PERSONAL INFORMATION

Name : YUDHI FITRI
Place / Date of Birth : Palembang, September 28th 1976
Marital Status : Married
Nationality : Indonesian
Permanent Address : Perum Marchelia Blok-B No.92 Batam Centre, Kepulauan Riau – Indonesia.

Mobile Phone : (62) 812-700-5737
E-mail Address : yudhi_pnb@yahoo.com
Passport Number : R 708818 Exp date 2013
Qualifications : Coating Inspector Indocor Level-1

EDUCATION BACKGROUND
Senior High School-Indonesia

SUMMARY OF EXPERIENCE
Having more than 3 (three) years in Inspection & Quality Control & coordination, inspection, prepare quality control procedure and responsible for general quality control activities to confirm that they comply with specified procedure or Client requirement. Has served as QC Inspector, Coating and Painting Inspector for Oil and Gas Project, Oil Refinery Project, Petrochemical, and Pipelines Project (Onshore and Offshore Project).

Having 3 Years work as Scafolder in Japan,included preparation and build.

PROFESSIONAL TRAINING ATTENDED

 “Coating Inspector Indocor Level-1 Conducted by an INDOCOR’S Authorized Training Body for research and development of corrosion and material product. Held in Batam on February 17th – February 23th 2008.
Certificate no: 008/IC.I/I-56/XI/2007, By Mr. Ir. Lindung Silalahi.
Following Certificate of Seminar and First National Conference.

SKILL
• Knowledge of Coating and Painting Inspector and Quality Control
• Knowledge of windows Application, MS office, Corel Draw, Adobe, Photoshop and Internet research
• Excellent in English both oral and written
• Excellent in Japanese both oral and writen
• Knowledge of Code SSPC, ASTM, NACE, ISO, etc

PROFESSIONAL WORKING EXPERIENCE
(From current company to previous company)

1. Periods : September 2007 — March 2008
Company : PT. AGUNG ING RAYA (BATAM - INDONESIA)
Project Assigned :
o Montara Field Development FPSO Project
o Prosafe FPSO Project
Position : QC Painting
Job Description
o Monitoring and Inspection surface preparation Blasting and Painting to ensure and check abrasive, surface profile, coating, environmental and Perform test such as Holiday test, Adhesion test (after the coating process will quantify the strength of the bond between substrate & coating).
o Control Calibration Interval, Calibration Status and In-House Calibration of Equipment
o Final Inspection coating prior shipment.
o Maintain Daily Activities and Reported
o Review & Verify with Client all works completed successfully and ensure that Report/Record as Per Client Specification and Fabrication Procedure.
o Review & Compile All Field Blasting and Painting Record for Manufacturing Data Report (MDR) or Project Documentation for turn over document to Client.

2. Periods : January 2007 – April 2007
Company : PT. AMUKTI MITRA PERSADA
Project Assigned : Kerisi CPP Topsides Construction Project, SMOE Batam Indonesia
Position : Quality Control
Job Description
o Responsible for Implementation of various Customer Specification during production process
o Responsible and Witnessed Production Testing Execution ( Field Testing and Laboratory Testing )
o Monitoring and Inspection surface preparation Blasting and Painting to ensure and check abrasive, surface profile, coating, environmental and Perform test such as Holiday test, Adhesion test (after the coating process will quantify the strength of the bond between substrate & coating).
o Maintain Daily Activities and Reported to QC Manager
o Review & Verify with Client all works completed successfully and ensure that Report/Record as Per Client Specification and Fabrication Procedure.
o Review & Compile All Field Blasting and Painting Record for Manufacturing Data Report (MDR) or Project Documentation for turn over document to Client.

3. Periods : January 2003 ─ January 2004
Company : PT. Rotary Engineering Indonesia
Project Assigned : MBS-II PROJECT, shop Fabrication
Position : Quality Control
Job Description
o Monitoring and Inspection surface preparation Blasting and Painting to ensure and check abrasive, surface profile, coating, environmental and Perform test such as Holiday test, Adhesion test (after the coating process will quantify the strength of the bond between substrate & coating).
o Control Calibration Interval, Calibration Status and In-House Calibration of Equipment
o Final Inspection coating prior shipment.
o Maintain Daily Activities and Reported
o Review & Verify with Client all works completed successfully and ensure that Report/Record as Per Client Specification and Fabrication Procedure.
o Review & Compile All Field Blasting and Painting Record for Manufacturing Data Report (MDR) or Project Documentation for turn over document to Client.

Note:
Original copy of certification and other supporting documents may be called for and presented if and when required

I hereby certify that all statements in this data are true and correct to the best of my knowledge and belief.

Best regards,

YUDHI FITRI

A. PERSONAL INFORMATION
Name : JUSRI PAULUS GIRSANG
Place / Date of Birth : Medan / June 18th , 1976
Matial Status : Single
Nationality : Indonesian
Address : Puri Mestika Block B-7
Batam, Indonesia Postal Code 29432
Email : paulusgirsang @yahoo.com

Phone : Mobile +62 81364 676 196
Home -
Passport Number : B – 816555

B. EDUCATION BACKGROUND
DiplomaDegree of information technology
STMIK Bandung , Bandung - Indonesia (1996-2000)
C. QUALIFICATION
Personal Certification
 Ultrasonic Testing ASNT Level II
 Radiograph Interpreter ASNTLevel II
 Liquid Penetrant Testing ASNT Level II
 Magnetic Particle Testing ASNT Level II
D. OBJECTIVE
To obtain a professional position that will enable me to practice my analytical skills and acquire more knowledge.
E. CAPABILITES and EXPERTISE
I’m very keen in learning something new, facing new challenges, love traveling, like outdoor activities, and possess a very strong English knowledge. One of my extra curricular activities is joining the Indonesian Christian Student Movement, where I learned organizational skills, improve my personality, discipline, leadership, teamwork, creative, research, communication, adaptability, analytical, and interpersonal
F.WORK EXPERIENCE
 1998- 1999 On the job training in Perum Perumnas Bandung
 1997- 2000, Computer Instructor in BBC Computer Bandung
 2003- 2004, Software & Hardware maintenance in Exist Computer Bandung
 2005- 2006, Structural Fitter for CPP Arthit Project, Mc.Dermott Batam
 2006- July 2007, Structural Fitter for Woodside project, Mc.Dermott Batam
 July 2007- November 2007, Str.Fitter for Sutuvang Jacket Project, Mc.Dermott Batam
 November 2007- December 2007, Str.Fitter for Sutuvang deck Project, Mc.Dermott Batam
 December 2007- February 2008, Str,Fitter for LQ Sutuvang Project, Mc.Dermott Batam
 February 2008 Until Now,Str Fitter in DSF(Deck Support Frame) for Sutuvang Project, Mc.Dermott,Batam
G. PROFESSIONAL TRAINING and COURSE ATTENDED
 Structural Fitting Awareness Training, Pt. Mc.Dermott Indonesia, Batam
 Quality Awareness level 1, part 2, Pt. Mc.Dermott Indonesia, Batam
 Quality Awareness,level 2, Part 2, Pt. Mc.Dermott Indonesia, Batam
 Safety Induction, Pt. Mc.Dermott Indonesia, Batam
 Safety awareness, Pt. Mc.Dermott Indonesia, Batam
 Safety induction from Disnaker, BLK Karya bangsa, Batam
H. PRACTICAL AND INTERNSHIP EXPERIENCES

Job Training – Perum Perumnas, Bandung
Duration: 1 year, 1998-1999
I. PROFESIONAL ORGANIZATION EXPERIENCES & EXTRACURRICULAR ACTIVITIES
Himpunan Mahasiswa Teknik Informatika(HMIF),STMIK Bandung
Leader

Badan Pengurus Cabang - Gerakan Mahasiswa Kristen Indoensia (GMKI) cab. Bandung
Branch Committee of Indonesia Christian Student Movement Bandung

Dairi Student Associate in Bandung (KMP3D – Bandung)
General Secretary of Dairi Student Associate in Bandung

J. COMMITTEE EXPERIENCES
2000
Chief Committee of Fund Rising for Worship Concert Night and Fund Raising Charity, Hotel Preanger, Bandung

My greatest desire is to be joining with your team.
I declare the details stated to be true and complete.

April, 2008
Prepared by:

JUSRI PAULUS GIRSANG.

Dear Sir/Madam

I am a Dubbel Coded welder with a cirtificate ,in 2000 i have dane my welding inspectors level 1 at S.I.O.W and i
olso have done cotings level1 and 2 .Iam working at the moment in Saudi so i wil be pleased if u
can issest me in a long term job offer

Thank you ; MNR THP VAN STADEN

Dear Sir/Madam,

I was heard that your company have vacant position as QC INSPECTOR, and I am very interested to fill in that position.

CURRICULUM VITAE
PERSONAL DATA
NAME : UMI YEDI
DATE OF BIRTH : Palembang, August 06, 1981
NATIONALITY : Indonesian
MARITAL SATUS : Married
EDUCATION : Technical high school
ADDRESS : Perum Graha Nusa Permai Block A5 No.12
Batam - Indoneia
MOBILE : +62 813 72126963
EMAIL : yedi81@yahoo.com

TRAINING/COURSE(S) ATTENDED:
• June 2008 : Attended a Welding Seminar Development in Joining technologi and
Implications for Engineering services, Process and Fabrication Conducted by
The Welding Institute of UK - PT. Dua Utama Jaya, Batam - Indodnesia

• Nov 2007 : In-progress Welding Inspector Conducted by Ikbal M Yos -
APITINDO and MIGAS, Batam - Indonesia

• June 2006 : Ultrasonic Testing (UT) ASNT Level II for Pipe & Plate conducted by
the institute for Research and development of materials and Technical Product
(B4T), Bandung-Indonesia. Certificate no: 0606.220919

COMPUTER LITERATURE : MS office (Word, Excel), Internet.

WORKING EXPERIENCES:
• Dec 2006 to Present
Company : PT. Beta Engineering / APE – Batam Island
Position : QC Inspector
Duties and Responsibilities:
Main areas of responsibility include inspection including coordination of project fabrication / construction activities:
• Fabrication / construction of piping and steel structures
• Material inspection / Material Verification
• Shop fabrication of piping and steel structures
• Visual inspection and dimensional check after completed welding to meet as per drawing/finish dimension (pipe spool)
• Visual acceptance of weld. Receiving mill certificates, producing visual inspection report
• Final Visual Inspection accordance with ASME B31.3 and AWS D1.1
• Review of WPS, PQR, WPQT, & ITP
• Witness Welder Qualification Test Record accordance with ASME IX & AWS D1.1
• Review Documents Such as Fit-up & final visual inspection reports
• Review NDE, PWHT report
• Interpret RT Film based on code and project specification
• Follow up NDT result, record summarize and filling all NDT report and make progress report to client

Project Involved:
• Floating Production Storage and Offloading (FPSO) Tanker pacific, Montara Development Pipe Spools
• Noble Jim Day Semi-Submersible, Pipe Spools and steel structures
• Floating Production Storage and Offloading (FPSO) Tanker pacific, Raroa 1 Pipe Spools and steel structures
• Floating Production Storage and Offloading (FPSO) Aker Floating Production, Aker Smart 1 Pipe Spools and steel structures
• Noble Danny Adkins 1 Semi-Submersible, Pipe Spools and steel structures
• Seadrill 9 Semi-Submersible, Pipe Spools and steel structures
• Petro Rig II Semi-Submersible, Pipe Spools and steel structures
• Petrojack IV Jack-Up Drilling Unit, Pipe Spools and steel structures
• Bluesky Offshore Pacific Class 375 Jack-Up Drilling Unit, Pipe Spools

• August 2006 to Nov 2006
Company : PT. Wismar Inspecsindo – Indonesia
: ASNT UT Level II Technician
Project at:
• PT. Tri Karya Alam & Engineering – Batam Island
• PT. Asia Foundry & Engineering – Batam Island
• PT. Profab Indonesia – Batam Island

• Sept 2004 to Jul 2006
Company : PT. Beta Engineering / APE – Batam Island
Position : NDT QC Inspector
Duties and Responsibilities:
Main areas of responsibility include inspection including coordination of project fabrication / construction activities:
• Review NDE, PWHT report
• Prepare NDT request for inspection (RFI) for Piping and Steel Structures as per Approved Procedure for each project
• Calculate NDT Percentage for Piping as per drawing per line spool (system) of the total number of joints
• Calculate NDT Percentage for Steel Structure as per drawing per weld length and the total number of joints
• Follow up NDT result, record summarize and filling all NDT report and make progress report to client
• Prepare welder performance report to control the welders capability to carry out welding as per approved procedures to produce good weldment and achieve the minimum requirement
Project Involved:
• Petro Rig I Semi-Submersible, Pipe Spools and steel structures
• Petrojack III Jack-Up Drilling Unit, Pipe Spools and steel structures
• Deep Drill Invest 4 & 7 Pacific Class 375 Jack-Up Drilling Unit, Pipe Spools
• Awilco Pacific Pacific Class 375 Jack-Up Drilling Unit, Pipe Spools
• Seadrill Management Pacific Class 375 Jack-Up Drilling Unit, Pipe Spools
• Japan Drilling Company Pacific Class 375 Jack-Up Drilling Unit, Pipe Spools
• PT Apexindo Pacific Class 375 Jack-Up Drilling Unit, Pipe Spools
• Seadrill 9 Semi-Submersible, Pipe Spools and steel structures
• Seadrill 8 Semi-Submersible, Pipe Spools and steel structures
• Petrojack I Jack-Up Drilling Unit, Pipe Spools and steel structures
• BRIGHT JEWEL MODEC FPSO, RJS 409 Pipe Spools
• PRA I MODEC FPSO, Pipe Spools
• Transocean Inc MODEC FPSO, Pipe Spools
• Petrobras 54 Netherlands Floating Production Storage and Offloading (FPSO), Pipe Spools and Steel Structures
• Independence Hub Pipe Spools.
• 2600 Container Vessel Pipe Spools and Steel Structures

CURRICULUM VITAE
{ T.M.AGAM MAULANA }

PERSONAL DATA

N A M A : T.M.AGAM MAULANA
DATE OF BIRTH : 12 March 1983
PLACE OF BIRTH : Tg.Pinang - RIAU
NATIONALITY : Indonesia
RELIGION : Moslem
CIVIL STATUS : Single

ADDRESS : Tiban Mc.Dermott.Blok F No: 12. Sekupang
BATAM ISLAND INDONESIA

CONTACT NUMBER : Hp 0819674407 . ( 0778 ) 351082 : Hp 0819674407. Call: ( 0778 ) 351082
PASPORT NUMBER : A456625 : A 456625 A 456625

EDUCATION BACKGROUND
Technician high school

TRAINING COURSE & SEMINAR ATTENDED

YEAR NAME OF TRAINING NAME OF TRAINING
OBTAINED INSTITUTION INSTITUTION
Mey 18 - 24 Indonesian Association Corrotion
2008 INDOCOR INDOCOR LEVEL - 1
Mey 18 - 24 Coating Inspector & Painting Practitioner
2008 CCIPP LEVEL - 1
March 14 - 21 Merchant Marine Polytechnic of
2005 jakarta JAKARTA
April 11 - 13 Merchant Marine Polytechnic of
2005 jakarta JAKARTA

DETAILED WORKING EXPERIENCE

February 2006 - June 2008 : PT. UTRACO INDONESIA PT. GLOBAL PROCESS SYTEM
POSITION : MATERIAL CONTROLER : MATERIAL CONTROLLER : QC & MATERIAL CONTROLLER
PROJECT : MAARI & MONTARA PROJECT : COOGE RESOURCE MONTARA

SUMMARY OF MATERIAL : Haved more than 2 years for PT. UTRACO INDONESIA Haved more than 2 ( years ) for PT. GLOBAL PROCESS SYSTEM
Batam Base with various project for material Control
of Coating & painting Insulation ( External Coating &
Internal Coating ) for Oil & Gas. Onshore & Offshore
carried out

RESPONSIBILITY : Responsible to Inspection of incoming Material and check
Material Data sheet per Material Certificate.Also prepare
Material prior to production Every plant.Perform daily re -
port of Material used and make recommendation to project
Coordinator.perform weekly Inventory of Material and
account of Material stockfile and also make monthly
report.

DETAIL WORKING EXPERIENCE

April 2002 - June 2005 : : PT. UTRACO INDONESIA
POSITION : QC INSPECTOR
PROJECT : MAARI PROJECT

SUMMARY OF COATING INSPECTOR :
Haved more 3 years in inspection & Quality Control including supervision & coor
dination, inspection prepare Quality Controlprocedure and responsible for ge Quality Control procedure & responsible for ge
neral Quality Control actifities to confirm that they comply with speciefid proce
dure or client requirement.Has served as QC Inspector, Coating and painting In
spector, for oil & Gas Project.Oil refinery Project, Petrochemical and pipelines
project. ( Onshore & offshore Project )

JOB DESCRIPTION : Review painting procedure, Monitoring & Controlling
all contractor & subcontractor. Inspection actifities,
( Surface preparation Blasting & painting ) to ensure and
check abrasive, Surface profile Coating Environmental
and perform test such as Holiday test, adhesion test af
ter the Coating process will Quantify the strenght of the
bond between substrate & Coating.

This resume is being made in faith and truly

Best Regards

TM.AGAM MAULANA

Batam, July 25, 2008

Dear Sir/ Madam,

I would like have an opportunity in carrier for QC Inspector that fit to my Qualification and Educational Background.

I am 27 years old, single, energetic, honest and have excellent health. I like challenging, able to work under pressure, willing to work for any time and any place as you required.

I have successfully within Diploma III in Mechanical Engineering of Polytechnic Negeri Medan on September 2002 and also certification by Coating Inspector Indocor Level-1 Conducted by an INDOCOR’S Authorized Training Body for research and development of corrosion and material product. Held in Batam, 18th – 23rd 2008. Certificate no: NO: 013-CITCP/LI-LXIV/05/2008, By Mr. Ir. Lindung Silalahi, NACE ID#3841.

So, for consideration here is I enclose my CV containing my personal detail, qualification, working experience, current and expected salary and earliest date of availability, please attach it in it.

Thanks for your kind attention, I look forward to hearing from you.

Best Regards

Jimmi Carda Gultom
+628117008507

Dear sir or madam,
I am male 37 looking job position coating / painting inspector or coating / painting supervisor. i have certificate coating level 2 ASCOATINDO, and I has been experience in oil and gas.

Thanks and regards
Muh Idham
Hp 081373851345

Dear Sir / Madame,

I was heard that your company have vacant position as QC INSPECTOR, and I am very interested to fill in that position. If my qualification meet your company, would you please let me know whre and when should see you for further discussion or interview. Thanks for your attention and i’m looking forward for your replay.

Dear sir / Madame
I was heard that your company have vacant position as QC INSPECTOR, and i am very interested to fill in that position.
I’m 24 years old. I’m succesfully within university negery of medan and i have sertiicate level II from Ascoatindo,CCI and BNSP (Badan nasional standarisasi profesi) And LSPCI (lembaga sertifikasi profesi coating indonesia). I’m very happy if i can to filled the vacant

Regards,

Recardo
081276058641